Extremely durable, lightweight and tailored for demanding users. The rechargeable headlamp Fenix HM53R Garnet is a special edition designed with emphasis on top performance and maximum practicality in the field. It offers a dazzling light output of up to 1200 lumens (ANSI) with a range of up to 158 meters. Its main advantage is the neutral tint of white light (4500 K), which provides more faithful color rendering and much better contrast in nature.

In addition to the white reflector, the headlamp is also equipped with a powerful red light with an output of up to 30 lumens. This does not interfere with night vision adaptation and, thanks to a distinct flashing mode, the HM53R Garnet also serves excellently as a rear safety light for bicycles.

The lamp is powered by the included rechargeable 18350 battery with a capacity of 1600 mAh, which is recharged directly inside the headlamp via a modern USB-C connector. There is a practical indicator LED in the control button, thanks to which you always know precisely when it is time to replenish the energy. In an emergency, a single-use CR123A lithium battery can also be used for power (with maximum output limited to 150 lumens). Top electronics with digital regulation ensure constant light output even as the battery slowly discharges. In power-saving mode it can also shine for up to 250 hours continuously.

From headlamp to pocket flashlight in a second: The all-metal lamp can be easily popped out of the head strap and, thanks to the steel clip, attached to a belt, pocket or backpack strap. The tail cap of the lamp is also magnetic, so you can easily attach it to any metal surface. Together with full waterproofing according to the IP68 standard (immersion to 2 meters) and high impact resistance, this makes the HM53R Garnet an ideal companion for running, hiking, fishing, camping, as well as demanding professional work.

The HM53R Garnet version is specially modified for the local market and differs from the standard version in the following points:

• The LED in the long-range reflector has a neutral light tint instead of cool.
• After warming up it maintains higher output in Turbo mode, it does not reduce output in lower modes.
• The red cone has four power modes instead of three, including an extra economical mode with an output of 1 lumen.
• Stronger and faster flashing of the red light allows the HM53R Garnet to be used as a bicycle flasher.
• Memory for the last red light mode.

All lamp parameters (light output, runtime on batteries, waterproofing, range and impact resistance) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Fenix HM53R Garnet headlamp specifications

• A premium SST-25 high-power LED with a neutral light tint (4500 K) and a lifespan of 50,000 hours is used, plus two red Osram LEDs.
• Five white light modes: 1200 lumens (1.6 hours) -> 400 lumens (2.5 hours) -> 150 lumens (6.6 hours) -> 50 lumens (19 hours) -> 3 lumens (250 hours).
• Four red light modes: 30 lumens (6.5 hours) -> 10 lumens (13.5 hours) -> 1 lumen (108 hours) -> red flashing 10 lumens (/).
• Measured with the included Fenix 18350 Li-ion battery with a capacity of 1600 mAh (included in the package).
• In an emergency, an RCR123A Li-ion battery or a single-use CR123A lithium battery with a limited max output of 150 lumens can also be used for power (do not attempt to recharge them in the headlamp).
• Digital constant output regulation with overheating protection.
• Charging via USB-C connector on the side of the headlamp, charging time for a completely depleted battery is approx. 2.5 hours.
• Smooth light beam with a range of up to 158 meters (6,300 cd).
• Dimensions including the headlamp holder: 71 mm (length) x 37 mm (width) x 36 mm (height).
• The diameter of the cylindrical body of the lamp is 21 millimeters at the narrowest point.
• Weight 102 grams (including strap and battery).
• Battery capacity indication and low voltage warning.
• The headlamp has memory and turns on in the last set mode of both red and white light, except for Turbo mode.
• Magnetic tail cap, the headlamp can be attached to anything iron.
• Protection against reverse battery insertion (reverse polarity).
• The cleverly designed holder also functions as a clip when you remove the headlamp from the strap.
• Comfortable perforated strap. The gray-orange version is equipped with reflective elements, the black version of the headlamp is without reflective elements.
• Simple one-switch operation.
• Body made of high-strength aerospace aluminum alloy A6061-T6.
• The surface is highly scratch-resistant - Type III hard anodized.
• Dustproof and waterproof according to IP68 standard (tested to a depth of 2 meters under water).
• Impact resistant from a fall of 2 meters.
• High-quality TIR optics with high light transmittance.
• The package includes the HM53R Garnet headlamp with holder and strap, ARB-L18-1600 battery, spare O-ring, charging USB-C cable.
• A Fenix APB-20 pouch can be purchased for the headlamp; after removing it from the holder it can be attached to handlebars using Lockblock and Bikeblock mounts.
• It is also possible to purchase a spare strap, a USB wall adapter and a USB car adapter.

Usage

There may be a black insulating cap on the battery inside the lamp from the factory. Before first use, remove it from the battery.

• A turned-off headlamp is turned on into white light by holding the button for 0.5 seconds.
• A turned-off headlamp is turned on into red light by double-quick pressing the button.
• A turned-on headlamp is turned off by holding the button for 0.5 seconds.

If the headlamp is on, short presses of the button can cyclically switch output modes in the order 3 - 50 - 150 - 400 - 1200 lumens (when turned on to white light), or red 1 lumen - red 10 lumens - red 30 lumens - red flashing (when turned on to red light). The headlamp has memory and turns on in the last set mode of both red and white light, except for Turbo mode. After turning off in Turbo mode it will always turn on in high mode.

Overheat protection: During prolonged use of the headlamp at high output modes, a large amount of heat accumulates. When the headlamp reaches a temperature of 55 °C or higher, it automatically reduces output by several lumens to lower the temperature. When the temperature drops below 55 °C, the output will gradually increase again.

Battery charge indicator: After a short press of the button (the headlamp must be turned off), the indicator LED in the button activates. If the indicator diode lights green, the battery is charged above 80%. Green blinking means 50-80% capacity. If it lights red, it is charged to 20-50%. Red blinking indicates that less than 20% of the battery capacity remains. The indication works correctly only with rechargeable 18350 batteries.

Charging: Open the rubber cover of the charging connector and plug the supplied cable into the lamp (USB-C connector). Plug the other end of the cable into a computer, power bank or USB adapter for wall or car (not included). During charging the side button lights red and after full charge it lights green. After charging the lamp, reseal the charging connector using the rubber cover. Charging a fully depleted battery takes approx. 2.5 hours. The headlamp can be used during charging, but charging time will be extended and available output modes depend on the current battery charge level.

Low battery warning: If the battery voltage drops below the set level, the headlamp will automatically switch to lower output modes. If the headlamp is already switched to the lowest output mode and the battery is critically discharged, the indicator in the button will start flashing red. However, the headlamp will continue to shine until the battery is completely depleted. Note: the low battery warning is calibrated only for the voltage of rechargeable Li-ion batteries.

Locking the headlamp against accidental activation: Loosen the battery cap of the headlamp by a quarter turn; this will interrupt the electrical contact and the headlamp cannot be turned on. The button can also be locked electronically – with the headlamp off, hold the button pressed for 3 seconds. After locking the lamp will flash red. To unlock, hold the button for 3 seconds again.

Warning

• Keep the headlamp out of reach of children.
• Do not shine the headlamp directly into anyone’s eyes.
• Do not disassemble the sealed part in the head of the lamp yourself, this will void the warranty.
• Lock the headlamp, remove the battery or loosen the tail cap to prevent accidental activation when the headlamp is stored in a closed space (e.g. in a pocket or backpack)!
• Do not shine on flammable objects from an immediate proximity to avoid damage or danger due to high temperature.
• If using a single-use CR123A battery, do not attempt to charge it in the lamp.
• If the rubber O-ring appears damaged after prolonged use, replace it. O-rings should also be lubricated to prevent rubber degradation. Following these rules will properly protect the lamp against water.
• If the headlamp flashes, does not switch to higher output modes, or does not light up, this may be due to one of the following reasons:
  • The battery is almost depleted – charge or replace it.
  • Contacts inside the headlamp are dirty – clean them with a cotton swab moistened with alcohol.
  • The rear part of the headlamp is loose – tighten it.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.