Professional rechargeable torch Fenix WF30RE with ATEX/IECex certification for use in explosive atmospheres. The torch is powered by a specially modified Li-ion rechargeable battery ARB-L21-2600Ex with a capacity of 2600 mAh and provides a light output of up to 280 lumens with a beam distance of 170 metres. The battery is recharged directly in the torch using a special charger with safety circuits.

The torch body is made from aircraft aluminium with high durability and impact resistance. The torch is designed primarily for firefighters and rescue workers, and is also suitable as a work torch in industrial facilities where explosive dusts and gases may be present. Examples include chemical plants, refineries, textile mills, paper mills, grain mills, metallurgical facilities, power stations and other industrial operations.

Certifications: Suitable for use in zones 1-2 of explosive gases and in zones 21-22 of explosive dust. Full certification details: IECEx: IECEx TUR 18.0042X: Ex ib IIC T4 Gb Ex ib IIIC T130°C Db ATEX: TÜV 18 ATEX 8252X: II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T130°C Db Also complies with CSA and NEPSI certifications.

Specifications of the ATEX work torch WF30RE:

• Uses a powerful Cree XP-G2 LED with neutral colour temperature and a lifespan of 50,000 hours.
• Four power modes: 280 lumens (6.83 hours) -> 120 lumens (15.66 hours) -> 30 lumens (120 hours) -> strobe (280 lumens).
• Uses a special Fenix Li-ion rechargeable battery ARB-L21-2600Ex with a capacity of 2600 mAh.
• A modified 18650 type certified for explosive atmospheres.
• The battery is recharged directly in the torch using a special rechargeable adapter; charging a fully discharged battery takes 5.5 hours.
• The electronics are equipped with a protection function against over-discharge of the battery; when the voltage drops below a certain threshold, it automatically switches to a lower power mode.
• The torch has memory and can be switched on in the last set mode (does not apply to strobe).
• Battery charge status indication.
• Made from aircraft-grade hardened aluminium A6061-T6.
• Durable hard-to-scratch surface - Type III hard anodized.
• Impact resistant to drops from a height of 1 metre.
• Waterproof and dustproof to standard IP68 (tested underwater at a depth of 2 metres for 30 minutes).
• Textured aluminium reflector for perfect light beam with a beam distance of 170 metres (7200 cd).
• Dimensions 15.05 cm (length) x 3.4 cm (head diameter) x 2.8 cm (body diameter).
• Weight 215 grams (including battery).
• Included in the package: Fenix ARB-L21-2600Ex rechargeable battery, mains adapter, charging cable with safety circuits, wrist strap and spare O-ring.

Operation:

• The torch is switched on and off by holding the button on the side for 0.5 seconds.
• Lighting modes can be changed by short button presses in the cycle low-medium-high.
• To activate strobe, switch on the torch and then hold the button for 1.2 seconds. Press the button briefly to turn off strobe and the torch will return to the last used mode.
• Battery charge status indication - press the torch button (when the torch is off).
  • If the indicator LED glows green, the battery is charged to more than 85%.
  • Green flashing means 50-85% capacity.
  • If it glows red, it is charged to 25-50%.
  • Red flashing indicates that less than 25% battery capacity remains.

• Low battery warning - the torch will gradually automatically switch to the lowest mode and flash 3 times every ten minutes.
• Charging - connect the charger to the mains adapter and then to the electrical socket. The indicator LED on the charger will alternately flash red and green, indicating that it is ready to be connected to the torch. On the torch, flip open the rubber cover and connect the charger to the charging connector. The indicator LED on the charger glows red during charging and glows green when fully charged. After charging the torch, securely seal the charging connector again with the rubber cover. Never charge the torch in an explosive atmosphere.
• To replace the battery, unscrew the torch end cap using an 8 mm hex key. Never replace the battery in an explosive atmosphere.

Warning
Perform all servicing, charging and battery replacement outside explosive atmospheres. Use only the manufacturer-certified Fenix ARB-L21-2600Ex rechargeable battery. If the sealing rubber O-ring on the torch cap thread is damaged, replace it with the spare from the torch package. If the torch flashes, does not switch to higher power modes or does not light up, it may be due to one of the following reasons: The battery is discharged; charge it or replace it.

Warranty
Five-year warranty on the torch, two-year warranty on the battery.

We offer a 30-day period for returning or exchanging goods if, for any reason, you are not satisfied with your order.

For more information, please see our Return Policy here.

Orders received by 14:00 are dispatched the same day. Delivery usually takes place on the next business day, depending on the selected shipping method. During busy periods, please allow 1–3 business days for order processing.

Free delivery from €200 / for oversized shipments from €400

Free of charge, ready for pickup on the next business day

For more information, please see our Delivery page.